LumenPnP Feeder BOM v1.4.0
Download the Source Here
| Part Name | Image | Quantity | Part Type | Source 1 | Source 2 | Optional | Note |
|---|
| frame-8 |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| drive-motor-bracket |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| drive-motor-cover |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| peel-gear-frame-8-12 |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| peel-gear |  | 2 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| peel-worm-gear |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| release-lever |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| spool-holder |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| thimble |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | | |
|---|
| tape-guide |  | 1 | FDM | Download all 3D printed parts at the link at the top of the page. | | Yes | Replaces the spool arm and thimble. Used to guide tape into feeder for spools mounted beneath the machine. |
|---|
| PLA-filament |  | 1.2 | FIL | Link | | | Units in kg. |
|---|
| M3x14mm-flat-head |  | 3 | FST | Link | | | |
|---|
| M3x12mm-self-tapping-flat-head |  | 11 | FST | Link | | | |
|---|
| feeder-compression-spring |  | 1 | MISC | Link | | | |
|---|
| mobo | ![]() | 1 | PCA | | | | Click link above to download source |
|---|
| drive-wheel |  | 1 | MISC | Link | | | Click link above to download source - This is made out of tumbled laser cut brass |
|---|
| light-diffusion | ![]() | 1 | PCB | | | | Click link above to download source |
|---|
| photon-8mm-fid | ![]() | 1 | PCB | | | | Click link above to download source |
|---|
| n20-motor |  | 1 | MISC | Link | Link | | 1:210 gear ratio. |
|---|
| right-angle-n20 |  | 1 | MISC | Link | Link | | 14-tick per revolution encoder. 1:1030 gear ratio gearbox. |
|---|
| shaft-collar |  | 1 | MISC | Link | Link | | |
|---|