# Bluetooth Controller configuration options

# Copyright (c) 2016-2017 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0

# The following symbols are enabled depending if the controller actually
# supports the respective features.

config BT_CTLR_ENTROPY_SUPPORT
	bool

config BT_CTLR_CRYPTO_SUPPORT
	bool

config BT_CTLR_LE_ENC_SUPPORT
	bool

config BT_CTLR_CONN_PARAM_REQ_SUPPORT
	bool

config BT_CTLR_EXT_REJ_IND_SUPPORT
	bool

config BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT
	bool

config BT_CTLR_DATA_LEN_UPDATE_SUPPORT
	bool

config BT_CTLR_PRIVACY_SUPPORT
	bool

config BT_CTLR_EXT_SCAN_FP_SUPPORT
	bool

config BT_CTLR_PHY_UPDATE_SUPPORT
	bool

config BT_CTLR_PHY_2M_SUPPORT
	bool

config BT_CTLR_PHY_CODED_SUPPORT
	bool

config BT_CTLR_ADV_EXT_SUPPORT
	bool

config BT_CTLR_ADV_EXT_CODING_SELECTION_SUPPORT
	depends on BT_CTLR_PHY_CODED_SUPPORT
	bool

config BT_CTLR_ADV_PERIODIC_SUPPORT
	depends on BT_CTLR_ADV_EXT_SUPPORT
	bool

config BT_CTLR_ADV_PERIODIC_RSP_SUPPORT
	depends on BT_CTLR_ADV_PERIODIC_SUPPORT
	bool

config BT_CTLR_SYNC_PERIODIC_SUPPORT
	depends on BT_CTLR_ADV_EXT_SUPPORT
	bool

config BT_CTLR_SYNC_PERIODIC_RSP_SUPPORT
	depends on BT_CTLR_SYNC_PERIODIC_SUPPORT
	bool

config BT_CTLR_SYNC_TRANSFER_SENDER_SUPPORT
	depends on BT_CTLR_SYNC_PERIODIC_SUPPORT || BT_CTLR_ADV_PERIODIC_SUPPORT
	bool

config BT_CTLR_SYNC_TRANSFER_RECEIVER_SUPPORT
	depends on BT_CTLR_SYNC_PERIODIC_SUPPORT
	bool

config BT_CTLR_ADV_ISO_SUPPORT
	depends on BT_CTLR_ADV_PERIODIC_SUPPORT
	bool

config BT_CTLR_SYNC_ISO_SUPPORT
	depends on BT_CTLR_SYNC_PERIODIC_SUPPORT
	bool

config BT_CTLR_BROADCAST_ISO_ENC_SUPPORT
	depends on BT_CTLR_ADV_ISO_SUPPORT || BT_CTLR_SYNC_ISO_SUPPORT
	bool

config BT_CTLR_CENTRAL_ISO_SUPPORT
	bool

config BT_CTLR_PERIPHERAL_ISO_SUPPORT
	bool

config BT_CTLR_CHAN_SEL_2_SUPPORT
	bool

config BT_CTLR_MIN_USED_CHAN_SUPPORT
	bool

config BT_CTLR_SMI_SUPPORT
	bool

config BT_CTLR_SCA_UPDATE_SUPPORT
	bool

config BT_CTLR_CONN_RSSI_SUPPORT
	bool

config BT_CTLR_ECDH_SUPPORT
	bool

config BT_CTLR_READ_ISO_LINK_QUALITY_SUPPORT
	depends on BT_CTLR_SYNC_ISO_SUPPORT || \
		   BT_CTLR_CENTRAL_ISO_SUPPORT || \
		   BT_CTLR_PERIPHERAL_ISO_SUPPORT
	bool

config BT_CTLR_LE_POWER_CONTROL_SUPPORT
	bool

config BT_CTLR_LE_PATH_LOSS_MONITORING_SUPPORT
	bool

config BT_CTLR_SUBRATING_SUPPORT
	bool

config BT_CTLR_FRAME_SPACE_UPDATE_SUPPORT
	bool

config BT_CTLR_CHANNEL_SOUNDING_SUPPORT
	bool

config BT_CTLR_EXTENDED_FEAT_SET_SUPPORT
	bool

config BT_CTLR_SHORTER_CONNECTION_INTERVALS_SUPPORT
	bool

# Virtual option that all local LL implementations should select
config HAS_BT_CTLR
	bool

config BT_LL_SW_SPLIT
	bool "Software-based Bluetooth LE Link Layer"
	default y
	depends on DT_HAS_ZEPHYR_BT_HCI_LL_SW_SPLIT_ENABLED
	select HAS_BT_CTLR
	help
	  Use Zephyr software Bluetooth LE Link Layer ULL LLL split implementation.

config BT_CTLR_HCI
	bool "Host Controller Interface (HCI)"
	default y
	depends on HAS_BT_CTLR
	help
	  Enable the Host Controller interface (HCI) in the Controller.
	  This should almost always be enabled, except in a few special
	  cases, like for unit testing.

config BT_CTLR_HCI_NUM_CMD_PKT_MAX
	# Hidden Controller implementation supported Num_HCI_Command_Packets value.
	# This value will be used to calculate the total number of HCI command buffers to be
	# allocated, BT_BUF_CMD_TX_COUNT, dependent on HCI Controller to Host data flow control
	# being enabled.
	int
	depends on BT_CTLR_HCI
	default 1 if BT_LL_SW_SPLIT
	default 1

if HAS_BT_CTLR

comment "Bluetooth Controller configuration"

config BT_CTLR_ENTROPY
	bool "Random number generation in Controller"
	depends on BT_CTLR_ENTROPY_SUPPORT
	select ENTROPY_GENERATOR
	default y
	help
	  Use random number generation selected by the Controller.

	  Bluetooth Core Specification mandates a use of random number generator
	  compliant with FIPS PUB 140-2.

	  Deselecting this option allows for Controllers to use other entropy
	  generators which may not be true random number generators, and hence
	  would make the implementation experimental.

	  A Controller implementation could also provide custom bare-metal
	  random number generator implementation without any support in Zephyr
	  driver, i.e. there is no ENTROPY_HAS_DRIVER enabled.

config BT_CTLR_CRYPTO
	bool "Crypto functions in Controller"
	depends on BT_CTLR_CRYPTO_SUPPORT
	default y
	help
	  Use random number generation and AES encryption support functions
	  provided by the controller.

	  Support for HCI LE Rand and HCI LE Encrypt commands is mandatory by
	  Bluetooth Core Specification.

	  In an Application/Host and Controller split (using a HCI transport) or
	  combined builds for single CPU SoCs, applications can use their own
	  FIPS-197 compliant cryptographic implementations. In this case the
	  Controller cryptographic implementations can be disabled to save flash
	  and RAM usage.

config BT_CTLR_HCI_VS_BUILD_INFO
	string "Zephyr HCI VS Build Info string"
	default ""
	depends on BT_CTLR_HCI && BT_HCI_VS
	help
	  User-defined string that will be returned by the Zephyr VS Read Build
	  Information command after the Zephyr version and build time. When
	  setting this to a value different from an empty string, a space
	  character is required at the beginning to separate it from the
	  already included information.

config BT_CTLR_DUP_FILTER_LEN
	int "Number of addresses in the scan duplicate filter"
	depends on BT_OBSERVER
	depends on BT_LL_SW_SPLIT
	default 16
	help
	  Set the number of unique Bluetooth LE addresses that can be filtered as
	  duplicates while scanning.

config BT_CTLR_DUP_FILTER_ADV_SET_MAX
	int "Number of Extended Advertising Sets in the scan duplicate filter"
	depends on BT_OBSERVER && BT_CTLR_ADV_EXT && (BT_CTLR_DUP_FILTER_LEN > 0)
	depends on BT_LL_SW_SPLIT
	range 1 16
	default 1
	help
	  Set the number of unique Advertising Set ID per Bluetooth Low Energy
	  addresses that can be filtered as duplicates while Extended Scanning.

config BT_CTLR_RX_BUFFERS
	int "Number of Rx buffers"
	depends on BT_LL_SW_SPLIT
	default 6 if BT_HCI_RAW
	default 1
	range 1 18
	help
	  Set the number of Rx PDUs to be buffered in the controller. In a 7.5ms
	  connection interval and 2M PHY, maximum 18 packets with L2CAP payload
	  size of 1 byte can be received.

config BT_CTLR_ISO_RX_BUFFERS
	int "Number of Isochronous Rx buffers"
	depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
	default 8
	range 1 30
	help
	  Set the number of Isochronous Rx PDUs to be buffered in the
	  controller. Number of required RX buffers would worst-case be
	  the number of RX nodes prepared in one ISO event for each
	  active ISO group. This depends on the number of bursts in an
	  ISO group and number of groups, and may need to be set lower
	  that the theoretical maximum. Default of 8 is for supporting
	  two groups of 4 payloads, e.g. 2 CIGs with 2 CISes of BN=2.

config BT_CTLR_ISO_TX_BUFFERS
	int "Number of Isochronous Tx buffers"
	depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
	range 1 $(UINT8_MAX)
	default BT_ISO_TX_BUF_COUNT if BT_ISO
	default 3
	help
	  Set the number of Isochronous Tx PDUs to be queued for transmission
	  in the controller.

config BT_CTLR_ISO_TX_BUFFER_SIZE
	int "Isochronous Tx buffer size"
	depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
	range 9 4103 if BT_LL_SW_SPLIT
	range 1 $(UINT16_MAX)
	default 9 if BT_LL_SW_SPLIT
	default 1
	help
	  Size of the Isochronous Tx buffers and the value returned in HCI LE
	  Read Buffer Size V2 command response. This is the data portion of the
	  HCI ISO Data packet, corresponding to the Data_Total_Length field.

	  Currently the maximum SDU length is 4095 bytes, hence add HCI ISO
	  Data packet overhead (the Packet_Sequence_Number, ISO_SDU_Length,
	  Packet_Status_Flag fields; and the optional Time_Stamp field, if
	  supplied) of 8 bytes.

config BT_CTLR_ISOAL_SOURCES
	int "Number of Isochronous Adaptation Layer sources"
	depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
	range 1 64
	default 1
	help
	  Set the number of concurrently active sources supported by the
	  ISO AL.

config BT_CTLR_ISOAL_SINKS
	int "Number of Isochronous Adaptation Layer sinks"
	depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
	range 1 64
	default 1
	help
	  Set the number of concurrently active sinks supported by the
	  ISO AL.

config BT_CTLR_ISO_RX_SDU_BUFFERS
	int "Number of SDU fragments that the ISO-AL can buffer"
	depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
	default 0
	range 0 64
	help
	  Set the number of Isochronous Rx SDU fragments to be buffered in the
	  ISO-AL per sink. Buffering is required to compute the size and status
	  of the received SDU across all the fragments before each is released.
	  The number of buffers and maximum SDU fragment size will limit the
	  maximum size of an SDU that can be accurately declared in the HCI ISO
	  Data header.

config BT_CTLR_ISO_VENDOR_DATA_PATH
	bool "Vendor-specific ISO data path"
	depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
	select BT_CTLR_HCI_CODEC_AND_DELAY_INFO

choice BT_CTLR_TX_PWR
	prompt "Tx Power"
	default BT_CTLR_TX_PWR_0
	depends on BT_CTLR_TX_PWR_ANTENNA = 0 || BT_LL_SW_SPLIT
	help
	  Select a supported Bluetooth LE Radio transmit power level in dBm.
	  Only values supported natively by the SoC are available.
	  The value set here represents the actual default power level fed
	  to the antenna.

config BT_CTLR_TX_PWR_PLUS_21
	bool "+21 dBm"
	depends on SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_PLUS_18
	bool "+18 dBm"
	depends on SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_PLUS_15
	bool "+15 dBm"
	depends on SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_PLUS_12
	bool "+12 dBm"
	depends on SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_PLUS_10
	bool "+10 dBm"
	depends on SOC_SERIES_NRF54HX

config BT_CTLR_TX_PWR_PLUS_9
	bool "+9 dBm"
	depends on SOC_SERIES_NRF54HX || SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_PLUS_8
	bool "+8 dBm"
	depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_PLUS_7
	bool "+7 dBm"
	depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_PLUS_6
	bool "+6 dBm"
	depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX || SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_PLUS_5
	bool "+5 dBm"
	depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_PLUS_4
	bool "+4 dBm"
	depends on SOC_SERIES_NRF51X || SOC_COMPATIBLE_NRF52X || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_PLUS_3
	bool "+3 dBm"
	depends on SOC_COMPATIBLE_NRF52X || SOC_COMPATIBLE_NRF53X || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX || SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_PLUS_2
	bool "+2 dBm"
	depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH || SOC_COMPATIBLE_NRF53X || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_PLUS_1
	bool "+1 dBm"
	depends on SOC_COMPATIBLE_NRF53X || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_0
	bool "0 dBm"

config BT_CTLR_TX_PWR_MINUS_1
	bool "-1 dBm"
	depends on SOC_COMPATIBLE_NRF53X || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_2
	bool "-2 dBm"
	depends on SOC_COMPATIBLE_NRF53X || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_3
	bool "-3 dBm"
	depends on SOC_COMPATIBLE_NRF53X || SOC_COMPATIBLE_NRF54LX || SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_MINUS_4
	bool "-4 dBm"

config BT_CTLR_TX_PWR_MINUS_5
	bool "-5 dBm"
	depends on SOC_COMPATIBLE_NRF53X || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_6
	bool "-6 dBm"
	depends on SOC_COMPATIBLE_NRF53X || SOC_COMPATIBLE_NRF54LX || SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_MINUS_7
	bool "-7 dBm"
	depends on SOC_COMPATIBLE_NRF53X || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_8
	bool "-8 dBm"

config BT_CTLR_TX_PWR_MINUS_9
	bool "-9 dBm"
	depends on SOC_COMPATIBLE_NRF54LX || SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_MINUS_10
	bool "-10 dBm"
	depends on SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_12
	bool "-12 dBm"

config BT_CTLR_TX_PWR_MINUS_14
	bool "-14 dBm"
	depends on SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_15
	bool "-15 dBm"
	depends on SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_MINUS_16
	bool "-16 dBm"

config BT_CTLR_TX_PWR_MINUS_18
	bool "-18 dBm"
	depends on SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_MINUS_20
	bool "-20 dBm"

config BT_CTLR_TX_PWR_MINUS_21
	bool "-21 dBm"
	depends on SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_MINUS_24
	bool "-24 dBm"
	depends on SOC_FAMILY_ESPRESSIF_ESP32

config BT_CTLR_TX_PWR_MINUS_26
	bool "-26 dBm"
	depends on SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_30
	bool "-30 dBm"
	depends on SOC_SERIES_NRF51X || SOC_SERIES_NRF54HX

config BT_CTLR_TX_PWR_MINUS_40
	bool "-40 dBm"
	depends on SOC_COMPATIBLE_NRF52X || SOC_COMPATIBLE_NRF53X || SOC_SERIES_NRF54HX || SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_46
	bool "-46 dBm"
	depends on SOC_COMPATIBLE_NRF54LX

config BT_CTLR_TX_PWR_MINUS_70
	bool "-70 dBm"
	depends on SOC_SERIES_NRF54HX

endchoice

config BT_CTLR_TX_PWR_DBM
	int
	default 21 if BT_CTLR_TX_PWR_PLUS_21
	default 18 if BT_CTLR_TX_PWR_PLUS_18
	default 15 if BT_CTLR_TX_PWR_PLUS_15
	default 12 if BT_CTLR_TX_PWR_PLUS_12
	default 10 if BT_CTLR_TX_PWR_PLUS_10
	default 9 if BT_CTLR_TX_PWR_PLUS_9
	default 8 if BT_CTLR_TX_PWR_PLUS_8
	default 7 if BT_CTLR_TX_PWR_PLUS_7
	default 6 if BT_CTLR_TX_PWR_PLUS_6
	default 5 if BT_CTLR_TX_PWR_PLUS_5
	default 4 if BT_CTLR_TX_PWR_PLUS_4
	default 3 if BT_CTLR_TX_PWR_PLUS_3
	default 2 if BT_CTLR_TX_PWR_PLUS_2
	default 1 if BT_CTLR_TX_PWR_PLUS_1
	default 0 if BT_CTLR_TX_PWR_0
	default -1 if BT_CTLR_TX_PWR_MINUS_1
	default -2 if BT_CTLR_TX_PWR_MINUS_2
	default -3 if BT_CTLR_TX_PWR_MINUS_3
	default -4 if BT_CTLR_TX_PWR_MINUS_4
	default -5 if BT_CTLR_TX_PWR_MINUS_5
	default -6 if BT_CTLR_TX_PWR_MINUS_6
	default -7 if BT_CTLR_TX_PWR_MINUS_7
	default -8 if BT_CTLR_TX_PWR_MINUS_8
	default -9 if BT_CTLR_TX_PWR_MINUS_9
	default -10 if BT_CTLR_TX_PWR_MINUS_10
	default -12 if BT_CTLR_TX_PWR_MINUS_12
	default -14 if BT_CTLR_TX_PWR_MINUS_14
	default -15 if BT_CTLR_TX_PWR_MINUS_15
	default -16 if BT_CTLR_TX_PWR_MINUS_16
	default -18 if BT_CTLR_TX_PWR_MINUS_18
	default -20 if BT_CTLR_TX_PWR_MINUS_20
	default -21 if BT_CTLR_TX_PWR_MINUS_21
	default -24 if BT_CTLR_TX_PWR_MINUS_24
	default -26 if BT_CTLR_TX_PWR_MINUS_26
	default -30 if BT_CTLR_TX_PWR_MINUS_30
	default -40 if BT_CTLR_TX_PWR_MINUS_40
	default -46 if BT_CTLR_TX_PWR_MINUS_46
	default -70 if BT_CTLR_TX_PWR_MINUS_70

config BT_CTLR_TX_PWR_ANTENNA
	int "Set TX power (dBm)"
	range -127 127
	default 0
	depends on !BT_LL_SW_SPLIT
	help
	  Request a TX power in dBm. The power level set will be equal to or
	  less than the one requested, based on the values supported by the
	  hardware used. Values outside the supported range will be set to the
	  nearest supported value.
	  The value set here represents the actual power level fed to the
	  antenna. When a Front-End Module is used, gain values for the SoC and
	  FEM are calculated automatically to guarantee the closest possible
	  match to the value requested by the user at the RF output.

config BT_CTLR_TX_PWR_DYNAMIC_CONTROL
	bool "Tx Power Dynamic Control"
	depends on BT_HCI_VS
	help
	  Enable dynamic control of Tx power per role/connection.
	  Provides HCI VS commands to set and get the current Tx
	  power on an individual role/connection basis.

comment "Bluetooth Controller features"

if BT_CONN

config BT_CTLR_LE_ENC
	bool "LE Encryption"
	depends on BT_CTLR_LE_ENC_SUPPORT
	default y
	help
	  Enable support for Bluetooth v4.0 LE Encryption feature in the
	  Controller.

config BT_CTLR_ECDH
	bool "Elliptic Curve Diffie-Hellman (ECDH)"
	depends on BT_CTLR_ECDH_SUPPORT
	default y if BT_HCI_RAW
	help
	  Enable support for Bluetooth v4.2 Elliptic Curve Diffie-Hellman
	  feature in the controller.

config BT_CTLR_CONN_PARAM_REQ
	bool "Connection Parameter Request"
	depends on BT_CTLR_CONN_PARAM_REQ_SUPPORT
	select BT_CTLR_EXT_REJ_IND
	default y
	help
	  Enable support for Bluetooth v4.1 Connection Parameter Request feature
	  in the Controller.

config BT_CTLR_EXT_REJ_IND
	bool "Extended Reject Indication"
	depends on BT_CTLR_EXT_REJ_IND_SUPPORT
	default y
	help
	  Enable support for Bluetooth v4.1 Extended Reject Indication feature
	  in the Controller.

config BT_CTLR_PER_INIT_FEAT_XCHG
	bool "Peripheral-initiated Features Exchange"
	depends on BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT
	default y
	help
	  Enable support for Bluetooth v4.1 Peripheral-initiated Features Exchange
	  feature in the Controller.

config BT_CTLR_LE_PING
	bool "LE Ping"
	depends on BT_CTLR_LE_ENC
	default y
	help
	  Enable support for Bluetooth v4.1 LE Ping feature in the Controller.

config BT_CTLR_DATA_LENGTH
	# Hidden option to enable support for Bluetooth v4.2 LE Data Length
	# Update procedure in the Controller.
	bool
	depends on BT_DATA_LEN_UPDATE && BT_CTLR_DATA_LEN_UPDATE_SUPPORT
	default y

config BT_CTLR_DATA_LENGTH_MAX
	int "Maximum data length supported"
	depends on BT_CTLR_DATA_LENGTH
	default BT_BUF_ACL_RX_SIZE if BT_BUF_ACL_RX_SIZE <= 251
	default 27
	range 27 BT_BUF_ACL_RX_SIZE if BT_BUF_ACL_RX_SIZE < 251
	range 27 251
	help
	  Set the maximum data length of PDU supported in the Controller.

config BT_CTLR_PHY
	# Hidden option to enable support for Bluetooth 5.0 PHY Update
	# Procedure in the Controller.
	bool
	depends on BT_PHY_UPDATE && BT_CTLR_PHY_UPDATE_SUPPORT
	select BT_CTLR_EXT_REJ_IND
	default y

config BT_CTLR_MIN_USED_CHAN
	bool "Minimum Number of Used Channels"
	depends on BT_CTLR_MIN_USED_CHAN_SUPPORT
	default y
	help
	  Enable support for Bluetooth 5.0 Minimum Number of Used Channels
	  Procedure in the Controller.

config BT_CTLR_SCA_UPDATE
	bool "Sleep Clock Accuracy Update procedure"
	depends on BT_SCA_UPDATE && BT_CTLR_SCA_UPDATE_SUPPORT
	default y if BT_CTLR_CONN_ISO
	help
	  Enable support for Bluetooth 5.1 Sleep Clock Accuracy
	  Update procedure in the Controller.

config BT_CTLR_CONN_RSSI
	bool "Connection RSSI"
	depends on BT_CTLR_CONN_RSSI_SUPPORT
	default y if BT_HCI_RAW
	help
	  Enable connection RSSI measurement.

config BT_CTLR_LE_POWER_CONTROL
	bool "LE Power Control Request Feature"
	depends on BT_CTLR_LE_POWER_CONTROL_SUPPORT
	default y if BT_TRANSMIT_POWER_CONTROL
	help
	  Enable support for LE Power Control Request feature that is defined in the
	  Bluetooth Core specification, Version 5.4 | Vol 6, Part B, Section 4.6.31.

config BT_CTLR_LE_PATH_LOSS_MONITORING
	bool "LE Path Loss Monitoring Feature"
	depends on BT_CTLR_LE_PATH_LOSS_MONITORING_SUPPORT
	default y if BT_PATH_LOSS_MONITORING
	help
	  Enable support for LE Path Loss Monitoring feature that is defined in the
	  Bluetooth Core specification, Version 5.4 | Vol 6, Part B, Section 4.6.32.

endif # BT_CONN

config BT_CTLR_FILTER_ACCEPT_LIST
	bool "Filter Accept List Support"
	default y if BT_HCI_RAW || BT_FILTER_ACCEPT_LIST
	help
	  Enable support for controller Filter Accept List feature

config BT_CTLR_PRIVACY
	bool "LE Controller-based Privacy"
	depends on BT_CTLR_PRIVACY_SUPPORT
	select BT_CTLR_FILTER_ACCEPT_LIST if BT_LL_SW_SPLIT
	select BT_RPA
	default y if BT_HCI_RAW || BT_SMP
	help
	  Enable support for Bluetooth v4.2 LE Controller-based Privacy feature
	  in the Controller.

config BT_CTLR_FAL_SIZE
	int "LE Controller-based Privacy Accept List size"
	depends on BT_CTLR_FILTER_ACCEPT_LIST
	default 8
	range 1 8  if  (SOC_COMPATIBLE_NRF || SOC_OPENISA_RV32M1)
	range 1 16 if !(SOC_COMPATIBLE_NRF || SOC_OPENISA_RV32M1)
	help
	  Set the size of the Filter Accept List for LE Controller-based Privacy.
	  On nRF5x-based controllers, the hardware imposes a limit of 8 devices.
	  On OpenISA-based controllers, the hardware imposes a limit of 8 devices.

config BT_CTLR_RL_SIZE
	int "LE Controller-based Privacy Resolving List size"
	depends on BT_CTLR_PRIVACY
	default 8
	range 1 8 if SOC_COMPATIBLE_NRF
	range 1 8 if SOC_OPENISA_RV32M1
	help
	  Set the size of the Resolving List for LE Controller-based Privacy.
	  On nRF5x-based controllers, the hardware imposes a limit of 8 devices.
	  On OpenISA-based controllers, the hardware imposes a limit of 8 devices.

config BT_CTLR_EXT_SCAN_FP
	bool "LE Extended Scanner Filter Policies"
	depends on BT_OBSERVER && BT_CTLR_EXT_SCAN_FP_SUPPORT
	default y
	help
	  Enable support for Bluetooth v4.2 LE Extended Scanner Filter Policies
	  in the Controller.

config BT_CTLR_PHY_2M
	bool "2Mbps PHY Support"
	depends on (BT_CTLR_PHY || BT_CTLR_ADV_EXT) && BT_CTLR_PHY_2M_SUPPORT
	default y
	help
	  Enable support for Bluetooth 5.0 2Mbps PHY in the Controller.

config BT_CTLR_PHY_CODED
	bool "Coded PHY Support"
	depends on (BT_CTLR_PHY || BT_CTLR_ADV_EXT) && BT_CTLR_PHY_CODED_SUPPORT
	default y if BT_HCI_RAW
	help
	  Enable support for Bluetooth 5.0 Coded PHY in the Controller.

config BT_CTLR_CHAN_SEL_2
	bool "Channel Selection Algorithm #2"
	depends on (BT_CONN || (BT_BROADCASTER && BT_CTLR_ADV_EXT) || BT_CTLR_ADV_PERIODIC || BT_CTLR_SYNC_PERIODIC) && BT_CTLR_CHAN_SEL_2_SUPPORT
	default y
	help
	  Enable support for Bluetooth 5.0 LE Channel Selection Algorithm #2 in
	  the Controller.

config BT_CTLR_ADV_EXT
	bool "LE Advertising Extensions"
	depends on BT_CTLR_ADV_EXT_SUPPORT
	select BT_CTLR_CHAN_SEL_2 if BT_LL_SW_SPLIT && BT_BROADCASTER
	select BT_CTLR_SCAN_REQ_NOTIFY if BT_LL_SW_SPLIT && BT_BROADCASTER
	default y if BT_EXT_ADV
	help
	  Enable support for Bluetooth 5.0 LE Advertising Extensions in the
	  Controller.

if BT_CTLR_ADV_EXT

config BT_CTLR_ADV_SET
	int "LE Advertising Extensions Sets"
	depends on BT_BROADCASTER
	range 1 64
	default BT_EXT_ADV_MAX_ADV_SET if BT_EXT_ADV
	help
	  Maximum supported advertising sets.

config BT_CTLR_ADV_INTERVAL_MAX
	hex "Primary Advertising Interval Maximum"
	depends on BT_BROADCASTER
	range 0x000020 0x004000 if BT_LL_SW_SPLIT
	range 0x000020 0xFFFFFF
	default 0x004000 if BT_LL_SW_SPLIT
	default 0xFFFFFF
	help
	  Supported Primary Advertising Interval Maximum value.
	  Bluetooth Core Specification v5.3 permitted range is 0x000020 to
	  0xFFFFFF in 0.625 ms units.

config BT_CTLR_ADV_DATA_LEN_MAX
	int "Maximum Advertising Data Length"
	depends on BT_BROADCASTER
	range 31 191 if BT_LL_SW_SPLIT && !BT_CTLR_ADV_DATA_CHAIN
	range 31 1650
	help
	  Maximum Extended Advertising Data Length.

config BT_CTLR_ADV_PERIODIC
	bool "LE Periodic Advertising in Advertising State"
	depends on BT_BROADCASTER && BT_CTLR_ADV_PERIODIC_SUPPORT
	select BT_CTLR_CHAN_SEL_2
	default y if BT_PER_ADV
	help
	  Enable support for Bluetooth 5.0 LE Periodic Advertising in the
	  Controller.

config BT_CTLR_ADV_PERIODIC_RSP
	bool "LE Periodic Advertising with Responses in Advertising State"
	depends on BT_BROADCASTER && BT_CTLR_ADV_PERIODIC_RSP_SUPPORT
	select BT_CTLR_CHAN_SEL_2
	default y if BT_PER_ADV_RSP
	help
	  Enable support for Bluetooth 5.4 LE Periodic Advertising with
	  Responses in the Controller.

config BT_CTLR_ADV_EXT_CODING_SELECTION
	bool "Advertising Coding Selection support"
	depends on BT_CTLR_PHY_CODED && BT_CTLR_ADV_EXT_CODING_SELECTION_SUPPORT
	select BT_CTLR_SET_HOST_FEATURE if BT_OBSERVER
	default y if BT_EXT_ADV_CODING_SELECTION
	help
	  Enable support for Bluetooth 6.0 Advertising Coding Selection
	  in the Controller.

if BT_CTLR_ADV_PERIODIC

config BT_CTLR_ADV_PERIODIC_ADI_SUPPORT
	bool "Periodic Advertising ADI support"
	default y
	help
	  Enable support for adding AdvDataInfo in Periodic Advertising PDUs.

config BT_CTLR_ADV_PERIODIC_INTERVAL_MAX
	hex "Periodic Advertising Interval Maximum"
	range 0x0006 0x2000 if BT_LL_SW_SPLIT
	range 0x0006 0xFFFF
	default 0x2000 if BT_LL_SW_SPLIT
	default 0xFFFF
	help
	  Supported Periodic Advertising Interval Maximum value.
	  Bluetooth Core Specification v5.3 permitted range is 0x0006 to
	  0xFFFF in 1.25 ms units.

endif # BT_CTLR_ADV_PERIODIC

config BT_CTLR_SYNC_PERIODIC
	bool "LE Periodic Advertising in Synchronization State"
	depends on BT_OBSERVER && BT_CTLR_SYNC_PERIODIC_SUPPORT
	select BT_CTLR_CHAN_SEL_2
	default y if BT_PER_ADV_SYNC
	help
	  Enable support for Bluetooth 5.0 LE Periodic Advertising in
	  Synchronization state in the Controller.

config BT_CTLR_SYNC_PERIODIC_RSP
	bool "LE Periodic Advertising with Responses in Synchronization State"
	depends on BT_OBSERVER && BT_CTLR_SYNC_PERIODIC_RSP_SUPPORT
	select BT_CTLR_CHAN_SEL_2
	default y if BT_PER_ADV_SYNC_RSP
	help
	  Enable support for Bluetooth 5.4 LE Periodic Advertising with
	  Responses in Synchronization state in the Controller.

if BT_CTLR_SYNC_PERIODIC

config BT_CTLR_SYNC_PERIODIC_ADV_LIST
	bool "LE Periodic Advertiser List support"
	default y
	help
	  Enable support for LE Periodic Advertiser List support.

config BT_CTLR_SYNC_PERIODIC_ADV_LIST_SIZE
	int "LE Periodic Advertiser List size"
	depends on BT_CTLR_SYNC_PERIODIC_ADV_LIST
	range 1 $(UINT8_MAX)
	default 8
	help
	  Set Periodic Advertiser List size, this will be return in the HCI LE
	  Read Periodic Advertiser List Command.

config BT_CTLR_SYNC_PERIODIC_ADI_SUPPORT
	bool "Periodic Advertising Sync with ADI support (duplicate filtering)"
	default y
	help
	  Enable support for duplicate filtering using AdvDataInfo present in
	  Periodic Advertising PDUs.

config BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
	bool "LE Periodic Advertiser filtering by CTE type"
	default y
	help
	  Enable filtering of periodic advertisements depending on type of
	  Constant Tone Extension.

config BT_CTLR_SYNC_TRANSFER_RECEIVER
	bool "Periodic Advertising Sync Transfer receiver"
	depends on BT_CTLR_SYNC_TRANSFER_RECEIVER_SUPPORT
	default BT_PER_ADV_SYNC_TRANSFER_RECEIVER
	help
	  Enable support for the Periodic Advertising Sync Transfer control procedure
	  as a receiver of the LL_PERIODIC_SYNC_IND. See Core_v5.3, Vol 6, Part B,
	  Section 5.1.13

endif # BT_CTLR_SYNC_PERIODIC

config BT_CTLR_SYNC_TRANSFER_SENDER
	bool "Periodic Advertising Sync Transfer sender"
	depends on BT_CTLR_SYNC_TRANSFER_SENDER_SUPPORT
	select BT_TICKER_LAZY_GET if BT_LL_SW_SPLIT
	default BT_PER_ADV_SYNC_TRANSFER_SENDER
	help
	  Enable support for the Periodic Advertising Sync Transfer control procedure
	  as a transmitter of the LL_PERIODIC_SYNC_IND. See Core_v5.3, Vol 6, Part B,
	  Section 5.1.13

config BT_CTLR_ADV_ISO
	bool "LE Broadcast Isochronous Channel advertising" if !BT_LL_SW_SPLIT
	depends on BT_ISO_BROADCASTER && BT_CTLR_ADV_ISO_SUPPORT
	select BT_CTLR_ADV_PERIODIC
	select BT_CTLR_SET_HOST_FEATURE
	select BT_CTLR_ADV_ISO_SEQUENTIAL if !BT_CTLR_ADV_ISO_INTERLEAVED
	default y if BT_ISO_BROADCASTER
	help
	  Enable support for Bluetooth 5.2 LE Isochronous Advertising in the
	  Controller.

config BT_CTLR_ADV_ISO
	bool "LE Broadcast Isochronous Channel advertising (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
	select EXPERIMENTAL if BT_LL_SW_SPLIT

config BT_CTLR_ADV_ISO_SEQUENTIAL
	bool "LE Broadcast Isochronous Channel advertising sequential packing"
	depends on BT_CTLR_ADV_ISO

config BT_CTLR_ADV_ISO_INTERLEAVED
	bool "LE Broadcast Isochronous Channel advertising interleaved packing"
	depends on BT_CTLR_ADV_ISO

config BT_CTLR_SYNC_ISO
	bool "LE Broadcast Isochronous Channel advertising sync" if !BT_LL_SW_SPLIT
	depends on BT_ISO_SYNC_RECEIVER && BT_CTLR_SYNC_ISO_SUPPORT
	select BT_CTLR_SYNC_PERIODIC
	select BT_CTLR_SET_HOST_FEATURE
	select BT_CTLR_SYNC_ISO_SEQUENTIAL if !BT_CTLR_SYNC_ISO_INTERLEAVED
	default y if BT_ISO_SYNC_RECEIVER
	help
	  Enable support for Bluetooth 5.2 LE Isochronous Advertising sync in
	  the Controller.

config BT_CTLR_SYNC_ISO
	bool "LE Broadcast Isochronous Channel advertising sync (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
	select EXPERIMENTAL if BT_LL_SW_SPLIT

config BT_CTLR_SYNC_ISO_SEQUENTIAL
	bool "LE Broadcast Isochronous Channel advertising sync sequential packing"
	depends on BT_CTLR_SYNC_ISO
	default y

config BT_CTLR_SYNC_ISO_INTERLEAVED
	bool "LE Broadcast Isochronous Channel advertising sync interleaved packing"
	depends on BT_CTLR_SYNC_ISO
	default y

config BT_CTLR_BROADCAST_ISO
	bool
	default BT_CTLR_ADV_ISO || BT_CTLR_SYNC_ISO

config BT_CTLR_BROADCAST_ISO_ENC
	bool
	depends on BT_CTLR_BROADCAST_ISO_ENC_SUPPORT && BT_CTLR_BROADCAST_ISO
	select BT_CRYPTO if BT_LL_SW_SPLIT
	default y

config BT_CTLR_ADV_ISO_SET
	int "LE Isochronous Channel advertising sets"
	depends on BT_CTLR_ADV_ISO
	range 1 32
	default BT_ISO_MAX_BIG
	help
	  Maximum supported advertising sets.

config BT_CTLR_ADV_ISO_STREAM_MAX
	int "Maximum supported Broadcast ISO Streams per Broadcast ISO group"
	depends on BT_CTLR_ADV_ISO
	range 1 31
	help
	  Maximum supported Broadcast ISO Streams per Broadcast ISO group.

config BT_CTLR_ADV_ISO_STREAM_COUNT
	int "Maximum Broadcast ISO Streams"
	depends on BT_CTLR_ADV_ISO
	range BT_CTLR_ADV_ISO_STREAM_MAX 64
	default BT_ISO_MAX_CHAN
	help
	  Maximum Broadcast ISO Streams supported in the Controller across
	  all Broadcast ISO groups.

config BT_CTLR_ADV_ISO_PDU_LEN_MAX
	int "Maximum Broadcast Isochronous Channel PDU Length"
	depends on BT_CTLR_ADV_ISO
	range 1 251
	default 251
	help
	  Maximum Broadcast Isochronous Channel PDU Length.

config BT_CTLR_SCAN_SYNC_ISO_SET
	int "LE ISO Broadcast Isochronous Groups Sync Sets"
	depends on BT_CTLR_SYNC_ISO
	range 1 64
	default BT_ISO_MAX_BIG
	help
	  Maximum supported broadcast isochronous groups (BIGs) sync sets.

config BT_CTLR_SYNC_ISO_STREAM_MAX
	int "Maximum supported ISO Synchronized Receiver Streams per Broadcast ISO group"
	depends on BT_CTLR_SYNC_ISO
	range 1 31
	help
	  Maximum supported ISO Synchronized Receiver Streams per Broadcast ISO
	  group.

config BT_CTLR_SYNC_ISO_STREAM_COUNT
	int "Maximum ISO Synchronized Receiver Streams"
	depends on BT_CTLR_SYNC_ISO
	range BT_CTLR_SYNC_ISO_STREAM_MAX 64
	default BT_ISO_MAX_CHAN
	help
	  Maximum ISO Synchronized Receiver Streams supported in the
	  Controller across all Broadcast ISO groups.

config BT_CTLR_SYNC_ISO_PDU_LEN_MAX
	int "Maximum Synchronized Isochronous Channel PDU Length"
	depends on BT_CTLR_SYNC_ISO
	range 251 251 if BT_HCI_RAW
	range 1 251
	default 251
	help
	  Maximum Synchronized Receiver Isochronous Channel PDU Length.

endif # BT_CTLR_ADV_EXT

config BT_CTLR_SET_HOST_FEATURE
	bool "LE Set Host Feature Command" if !BT_LL_SW_SPLIT
	help
	  Enables optional LE Set Host Feature Command

config BT_CTLR_SET_HOST_FEATURE
	bool "LE Set Host Feature Command (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
	select EXPERIMENTAL if BT_LL_SW_SPLIT

config BT_CTLR_CENTRAL_ISO
	bool "LE Connected Isochronous Stream Central" if !BT_LL_SW_SPLIT
	depends on BT_CTLR_CENTRAL_ISO_SUPPORT && BT_ISO_CENTRAL
	default y if BT_ISO_CENTRAL
	help
	  Enable support for Bluetooth 5.2 LE Connected Isochronous Stream
	  Central role in the Controller.

config BT_CTLR_CENTRAL_ISO
	bool "LE Connected Isochronous Stream Central (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
	depends on BT_CTLR_CENTRAL_ISO_SUPPORT && BT_ISO_CENTRAL
	default y if BT_ISO_CENTRAL
	select BT_CTLR_SET_HOST_FEATURE
	select EXPERIMENTAL if BT_LL_SW_SPLIT

config BT_CTLR_PERIPHERAL_ISO
	bool "LE Connected Isochronous Stream Peripheral" if !BT_LL_SW_SPLIT
	depends on BT_CTLR_PERIPHERAL_ISO_SUPPORT && BT_ISO_PERIPHERAL
	default y if BT_ISO_PERIPHERAL
	help
	  Enable support for Bluetooth 5.2 LE Connected Isochronous Stream
	  Peripheral role in the Controller.

config BT_CTLR_PERIPHERAL_ISO
	bool "LE Connected Isochronous Stream Peripheral (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
	depends on BT_CTLR_PERIPHERAL_ISO_SUPPORT && BT_ISO_PERIPHERAL
	default y if BT_ISO_PERIPHERAL
	select BT_CTLR_SET_HOST_FEATURE
	select EXPERIMENTAL if BT_LL_SW_SPLIT

config BT_CTLR_CONN_ISO
	bool
	default BT_CTLR_CENTRAL_ISO || BT_CTLR_PERIPHERAL_ISO

config BT_CTLR_CONN_ISO_STREAMS
	int "LE Connected Isochronous Streams"
	depends on BT_CTLR_CONN_ISO
	range 1 64
	default BT_ISO_MAX_CHAN
	help
	  Maximum supported total number of CISes.

config BT_CTLR_CONN_ISO_GROUPS
	int "LE Connected Isochronous Groups"
	depends on BT_CTLR_CONN_ISO
	range 1 240
	default BT_ISO_MAX_CIG
	help
	  Maximum supported CIGs.

config BT_CTLR_CONN_ISO_STREAMS_PER_GROUP
	int "LE Connected Isochronous Streams per Group"
	depends on BT_CTLR_CONN_ISO
	range 1 31
	default 2
	help
	  Maximum supported CISes per CIG.

config BT_CTLR_CONN_ISO_PDU_LEN_MAX
	int "Maximum Connected Isochronous Channel PDU Length"
	depends on BT_CTLR_CONN_ISO
	range 251 251 if BT_HCI_RAW
	range 1 251
	default 251
	help
	  Maximum Connected Isochronous Channel PDU Length.

config BT_CTLR_ISO_TX_SDU_LEN_MAX
	int "Maximum Isochronous Channel Transmit SDU Length"
	depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
	range 1 4095
	default 1
	help
	  Maximum Isochronous Channel Transmit SDU Length.

config BT_CTLR_CONN_ISO_STREAMS_MAX_NSE
	int "LE Connected Isochronous Streams max number of subevents"
	depends on BT_CTLR_CONN_ISO
	range 1 31
	default 31
	help
	  Maximum number of CIS subevents.

config BT_CTLR_CONN_ISO_STREAMS_MAX_FT
	int "LE Connected Isochronous Streams max flush timeout"
	depends on BT_CTLR_CONN_ISO
	range 1 $(UINT8_MAX)
	default $(UINT8_MAX)
	help
	  Maximum number of CIS flush timeout events.

config BT_CTLR_ISO
	bool
	default BT_CTLR_BROADCAST_ISO || BT_CTLR_CONN_ISO

config BT_CTLR_READ_ISO_LINK_QUALITY
	bool "LE Read ISO Link Quality"
	depends on BT_CTLR_READ_ISO_LINK_QUALITY_SUPPORT
	depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
	help
	  Enable support for LE Read ISO Link Quality command.

config BT_CTLR_SMI_RX
	bool "Stable modulation index - Receiver"
	depends on BT_CTLR_SMI_SUPPORT
	help
	  Enable support for Bluetooth 5.0 SMI RX in the Controller.

config BT_CTLR_SMI_TX
	bool "Stable modulation index - Transmitter"
	depends on BT_CTLR_SMI_SUPPORT
	help
	  Enable support for Bluetooth 5.0 SMI TX in the Controller.

config BT_CTLR_SMI_TX_SETTING
	bool "Stable modulation index - Transmitter as setting"
	depends on BT_CTLR_SMI_TX && BT_CTLR_SETTINGS
	help
	  Enable support for Bluetooth 5.0 SMI TX through a system setting.

config BT_CTLR_HCI_CODEC_AND_DELAY_INFO
	bool "Codecs and controller delay information commands"
	depends on BT_CTLR_HCI
	help
	  Enable HCI commands to read information about supported
	  codecs, codec capabilities, and controller delay.

config BT_CTLR_SUBRATING
	bool "LE Connection Subrating"
	depends on BT_CTLR_SUBRATING_SUPPORT
	select BT_CTLR_SET_HOST_FEATURE
	default y if BT_SUBRATING
	help
	  Enable support for Bluetooth v5.3 LE Connection Subrating
	  in the Controller.

config BT_CTLR_FRAME_SPACE_UPDATE
	bool "Frame Space Update"
	depends on BT_CTLR_FRAME_SPACE_UPDATE_SUPPORT
	default y if BT_FRAME_SPACE_UPDATE
	help
	  Enable support for Bluetooth 6.0 Frame Space Update
	  in the Controller.

config BT_CTLR_CHANNEL_SOUNDING
	bool "Channel Sounding support"
	depends on BT_CTLR_CHANNEL_SOUNDING_SUPPORT
	select BT_CTLR_SET_HOST_FEATURE
	default y if BT_CHANNEL_SOUNDING
	help
	  Enable support for Bluetooth 6.0 Channel Sounding in the
	  Controller.

config BT_CTLR_EXTENDED_FEAT_SET
	bool "LL Extended Feature Set support"
	depends on BT_CTLR_EXTENDED_FEAT_SET_SUPPORT
	default y if BT_LE_EXTENDED_FEAT_SET
	help
	  Enable support for Bluetooth 6.0 LL Extended Feature Set
	  in the Controller.

config BT_CTLR_SHORTER_CONNECTION_INTERVALS
	bool "Shorter Connection Intervals"
	depends on BT_CTLR_SHORTER_CONNECTION_INTERVALS_SUPPORT
	depends on BT_CTLR_EXTENDED_FEAT_SET
	depends on BT_CTLR_SUBRATING
	select BT_CTLR_SET_HOST_FEATURE
	default y if BT_SHORTER_CONNECTION_INTERVALS
	help
	  Enable support for Bluetooth 6.2 Shorter Connection Intervals
	  in the controller.

rsource "Kconfig.df"
rsource "Kconfig.ll_sw_split"
rsource "Kconfig.dtm"

config BT_CTLR_ASSERT_OPTIMIZE_FOR_SIZE_SUPPORT
	bool

config BT_CTLR_ASSERT_DEBUG
	bool "Development asserts"
	default y
	help
	  This option enables development asserts used for code coverage.

	  The Controller will continue to function without memory leak or corruption with these
	  assertion checks disabled. Example, run-time mis-aligned memory access etc. which do
	  otherwise implicitly cause CPU fault during development testing. But these type of
	  asserted are essentially required for debugging, code and unit test coverage during
	  development cycle.

config BT_CTLR_ASSERT_HANDLER
	bool "Application Defined Assertion Handler"
	help
	  This option enables an application-defined sink for the
	  controller assertion mechanism. This must be defined in
	  application code as void \"bt_ctlr_assert_handle(char \*, int)\"
	  and will be invoked whenever the controller code encounters
	  an unrecoverable error.

config BT_CTLR_ASSERT_OPTIMIZE_FOR_SIZE
	bool "Assertions optimized for code size"
	depends on BT_CTLR_ASSERT_OPTIMIZE_FOR_SIZE_SUPPORT
	default y
	help
	  Optimize Controller assertion check for code size.

	  Example, reduces assertion check code size for ARM Cortex-M CPUs by using the undefined
	  instruction exception.
	  `arm-none-eabi-addr2line` commandline can be used to get the source file and line number
	  from the program counter value.

config BT_CTLR_VS_SCAN_REQ_RX
	bool "Use scan request reporting"
	depends on BT_HCI_VS && !BT_CTLR_ADV_EXT
	select BT_CTLR_SCAN_REQ_NOTIFY
	help
	  Enables usage of VS Scan Request Reports Command and Scan Request Received Event

endif # HAS_BT_CTLR

config BT_CTLR_DEBUG_PINS_CPUAPP
	bool "Bluetooth Controller Debug Pins"
	depends on BOARD_NRF5340DK_NRF5340_CPUAPP
	help
	  Route debug GPIO toggling for the Bluetooth Controller. Enable this when
	  using Bluetooth Controller Debug Pins in co-processor and the main
	  processor needs to setup and/or route the signals.
