What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_lo_frequency
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		Stores the Local Oscillator (LO) frequency in Hz.
		Reading returns the actual frequency in Hz.
		The values take the in_altvoltage0_lo_mode into account.

What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_lo_mode
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		The frequency divider and multipliers in the LO interface
		enable measurement sweeps beyond the operating frequency
		range of the source driving the (LOP, LOM) pins.
		This enables operation over the full 20 GHz bandwidth
		of the ADL5960 using a 6 GHz synthesizer as the LO source.

		This attribute Configures the LO path multiplier/divider
		or bypass. Reading returns the actual mode.

What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_lo_mode_available
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		Reading this returns the valid values that can be written to the
		in_altvoltage0_lo_mode attribute:

		* bypass -> Bypasses the IF frequency mixer
		* x1 -> The external applied LO frequency is directly
		  passed into the mixer
		* x2 -> The external applied LO frequency is doubled and
		  passed into the mixer
		* x4 -> The external applied LO frequency is quadrupled and
		  passed into the mixer
		* /2 -> The external applied LO frequency is divided and
		  passed into the mixer

What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage1_offset_frequency
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		Stores the Offset frequency applied to the OFP, OFM inputs in Hz.
		Reading returns the actual frequency in Hz.
		The values do not take the in_altvoltage1_offset_mode into
		account. Please see in_altvoltage1_if_frequency.

What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage1_offset_mode
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		This attribute Configures the Offset path divider and modes.
		Reading returns the actual mode.

What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage1_offset_mode_available
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		Reading this returns the valid values that can be written to the
		in_altvoltage1_offset_mode attribute:
		* bypass -> Bypasses the IF frequency mixer
		* off -> Dividers are off, offset signal is disconnected
		* x1 -> The external applied OFFS frequency is directly
		  passed into the mixer
		* /2 -> The external applied OFFS frequency is divided by 2 and
		  passed into the mixer
		* /4 -> The external applied OFFS frequency is divided by 4 and
		  passed into the mixer

What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage1_if_frequency
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		Stores the IF frequency applied to IF frequency offset mixer in Hz.
		Reading returns the actual frequency in Hz.
		The values take the in_altvoltage1_offset_mode into
		account.

What:		/sys/bus/iio/devices/iio:deviceX/out_voltage0_forward_hardwaregain
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		Stores the gain of the IF amplifier in the Forward path,
		to the (IFFP, IFFM) output, in 6dB steps.
		Reading returns the actual gain in dB.

What:		/sys/bus/iio/devices/iio:deviceX/out_voltage1_reverse_hardwaregain
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		Stores the gain of the IF amplifier in the Reverse path,
		to the (IFRP, IFRM) output, in 6dB steps.
		Reading returns the actual gain in dB.

What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_filter_low_pass_3db_frequency
KernelVersion:
Contact:	linux-iio@vger.kernel.org
Description:
		Stores the corner frequency of the narrow (CIF2) & wideband (CIF1)
		bandwidth IF filter in Hz.
		Reading returns the actual frequency in Hz.
