                  OPTIONS (1/4)

#GGX Deflickering Filter:#G A filter that removes
    ficker in interlaced modes by softening the
    rendered image. 

#GEnable 480p Modes:#G If a component cable is
    present, this option enables progressive
    640x480 modes.
                                      
#GEnable PAL Modes:#G These are disabled by default
    since many NTSC TVs don't support them.



                                        #C(cont...)#C
                  OPTIONS (2/4)

#GEnable PAL Background:#G Since most of the menus
    and screens are designed for 240p, this fills
    the borders with the selected color, however
    there are specific PAL patterns that do not 
    need this, such as grids and overscan.

#GChange PAL Background:#G Select the fill color for
    the PAL background.





                                        #C(cont...)#C
                  OPTIONS (3/4)

#GPAL starting line:#G PAL specifies the start of
    video data at line 23 1/2, this setting allows
    starting from line 24, centering the 528 
    active video lines in the 576i signal or 
    moving the whole screen to the bottom. The #GGC#G
    version starts at line 23.
                
#GStretch to full 288/576:#G Since the $H can't render
    the full 288p/576i screen in 1:1 pixel 
    mapping, this option enables a video mode for 
    all PAL settings where the 264/528 lines are 
    stretched vertically to fill the 576i PAL 
    signal. #YThis is uneven and should only be 
    used to visually check for overscan.#Y  #C(cont...)#C               
                  OPTIONS (4/4)

#G480p Scanline Intensity:#G When in line doubled
    480p mode, the suite allows the display of
    rendered scanlines. This determines the alpha
    value for them, 0% to eliminates them.

#G480p Scanlines:#G This setting allows the display
    or EVEN or ODD scanline display in 480p line
    doubled mode.

Holding #GL#G and #GR#G buttons while in the options menu
will reset all options to their defaults.